Home Automation OMNITOUCH 53A00-1 Instrukcja Użytkownika Pobierz pdf (Strona 11)

CONNECTING TO OMNILT

Connect the "Yellow" and "Green" wires from the touchscreen to the "YEL" and "GRN"

terminals under the section marked "CONSOLE" on the controller, respectively. Connect the

"Red" and "Black" wires from the touchscreen to the "12V" and "GND" terminals under the

section marked "AUX" on the controller, respectively.

A maximum combination of 4 touchscreens and consoles can be used with OmniLT.

NOTE: Do not exceed the maximum current limitation of the controller. If more than 1

touchscreen is used, the additional touchscreens must be powered from an external power

supply or HAI Touchscreen Hub.

THE EXTERNAL POWER SUPPLY MUST BE GROUNDED TO THE CONTROLLER

EARTH GROUND TO AVOID DAMAGE TO THE TOUCHSCREEN.

GREEN

YELLOW

BLACK

RED

CONNECT ENDS OF SUPPLIED

CABLE TO CORRESPONDING ENDS

OF THE POWER/COMMUNICATION

CABLE FROM THE CONTROLLER

(PLUGS INTO J1)

SUPPLIED CABLE

YELLOW

BLACK

RED

GREEN

OmniLT Connections

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Brak uwag

Home Automation OMNITOUCH 53A00-1 Instrukcja Użytkownika Strona 11